To help us provide you with free impartial advice, we may earn a commission if you buy through links on our site. Learn more

Orbitsound M9 review

Our Rating :
Price when reviewed : £299
inc VAT

Incredible, room-filling audio that just shouldn't sound this good from such a small soundbar

After proving that you could build a tiny soundbar with room-filling stereo sound last year with the Orbitsound T9, the company’s back again this year with an even more advanced budget soundbar, the M9.

This takes the same case and speakers as the T9, but has several tweaks for higher-quality sound and convenience. Most obviously, this is the first product we’ve seen from Orbitsound not to use an iPhone dock, relying on Bluetooth instead.

This makes a lot of sense, as Apple’s decision to ditch the old 30-pin connector and move to Lightning with iPhone 5, makes it harder to make a physical dock. Besides, switching to Bluetooth means compatibility with practically any smartphone, such as the Samsung Galaxy S3, or tablets that won’t even fit in the dock, such as the iPad 4. Of course, there’s also an optical digital input, as well as stereo phono and 3.5mm minijack inputs, so you can physically connect your mobile device or TV.

Orbitsound M9 soundbar rear As well as Bluetooth, you can physically connect devices via the optical S/PDIF and analogue line-in and phono inputs

Bluetooth isn’t the only wireless technology on display, as the subwoofer now has a digital wire-free connection. This may not sound like a complicated device to add, but behind the scenes a lot of work has gone into it, primarily because of the issues of delay. Delay, also called latency, is the time between the sender (the soundbar in this case) transmitting audio and the receiver (the subwoofer here) getting it. If that delay is above 30ms, as it frequently is in digital systems, then the soundbar and subwoofer would noticeably be out of sync.

Orbitsound M9 wireless subwoofer A wireless subwoofer might not sound complicated to add, but getting it working this well is harder than you think

There are ways around this problem, with the easiest solution to simply introduce a delay to the soundbar, so it syncs with the subwoofer. However, this has a major problem when you hook up a TV, though: all of your sound is then out and you lose lip-sync.

Orbitsound’s method was to replace the wireless antennas in the soundbar and subwoofer with hi-gain models. This improves reception and means that a smaller buffer is needed, reducing delay. In fact, the company states that the subwoofer has less than 10ms of delay. Subwoofers come pre-paired with their soundbars, although they each have connection buttons on them, should you need to re-pair them. Technically, the soundbar is one-to-many, so you could even connect up multiple subwoofers, if you think that the bass is too directional.

Pages: 1 2 3

Specifications

Rating*****
AwardBest Buy
Speaker configuration2.1
RMS power output200W
Power consumption standby1W
Power consumption on12W
Analogue inputs3.5mm stereo, stereo phono
Digital inputsoptical S/PDIF, Bluetooth
Dock connectornone
Headphone outputnone
Satellite cable lengthsN/A
Cable typeN/A
Controls locatedmain unit, remote control
Digital processingN/A
Tone controlsbass and treble
Price£299
Detailswww.orbitsound.com

Read more

Reviews